Features:

• Adjustable acceleration and deceleration time (0 to 2.5s)
• Stable speed operation
• Switch for manual or automatic recovery of the thermal overload device
• One (1) DIP switch combined with one (1) rotary switch to select up to 20 different fixed speeds
• DIP switch to select the condition of error signal activity; during normal status or abnormal status
• Forcibly stops the motor if motor lock or thermal overload error lasts for 4 seconds or more.
• Three (3) LEDs (green, red, & orange) to identify the type of error and number of error occurrences
• Pulse signal output to indicate motor revolution

Driver Card CB-016S2

Performance Data

CB-016S2 Performance Data PDF

The CB-016S2 driver card is used to control Power Moller® 24 brushless DC motorized rollers. It performs motor run/stop along with direction functions. Speed selection via rotary switch (20 fixed speeds). Variable speed can also be controlled by an external analogue voltage (0 to 10V). Overload protection through a built-in thermister and current limiter; error signal in case of motor overload, Switchable PNP or NPN inputs / outputs. Acceleration and deceleration regulated using 2 potentiometers (0 Ð 2sec). Automatic or manual restart after overload activation. The CB-016S2 can deliver a PWM (Pulse Width Modulation) by means of a magnetic pulse. Also available for rollers with built-in brakes, CB-016BS2.

Applicable Models
PM486FS
PM486FE
PM486FP
PM570FE
PM605FE
PM635FS