Terminal Blocks/
Driver Cards/
Fittings:
  • No. A-071/81-G
  • No. A-200
  • No. A-270/80-GS
  • No. A-800
  • No. C-001/-D
  • CB-002N
  • CB-005N
  • CB-016S2
  • No. D-400-B
  • No. E-920
  • No. F-001-B
  • HB-508
  • HB-510
  • No. M-021-B
    		•





    Dimensions:


    Features:

    • Designed to be functional with the FS and FE series motors, as well as the higher torque series FP
    • Run Hold timer added to the Forcible RUN input
      • Now there is no need for an external controller/timer with, or awkward positioning of, a second sensor used for infeeding the conveyor
    • Integral indexed rotary switch provides easy speed adjustment without the need for "tweaking"
    • More LED functionality to communicate operating and error statuses
    • Selectable automatic or manual recovery for thermal overload protection
    • Motor lock protection shuts motor down if it is locked for at least 4 seconds
    • Lead free design for RoHS conformity
    • Logic for general zero pressure accumulation (ZPA) control is built-in
    • Direct connection for a photo-sensor to both power it and receive its output signal
    • Easy connection between adjacent HB-510s with communication cables simplifies wiring
    • Selectable singulated or slug (train) release modes for ZPA function
    • Flexible Zone Recognition (patented) to handle long articles which simultaneously block multiple sensors
      • Only available in slug release mode
    • Synchronized speed variation to simultaneously adjust the speed of the rollers with a single external speed control signal
    • Stable speed function to ensure that different weight articles travel at the same rate
      • As long as the load does not exceed the rated torque for a given speed
    • Enclosure is made from fire resistant ABS

    Hybrid Driver Card
    HB-510


    Performance Data
    PDF HB510 Performance Data PDF

    HB-510 is the latest generation of Itoh DenkiÍs built-in ZPA Logic Hybrid Driver Cards. The HB-510 is applicable to FP series high power unit as well as to FS and FE standard rollers. Having both slug (train) and singulated tote release mode along with sensor and jam timer functions, the HB-510 perfectly suits the most common ZPA conditions. In addition, the HB-510 conforms to RoHS directive for lead free design. It provides functions like flexible zone recognizing, synchronized speed variation, and stable speed to satisfy even the most diverse and more sophisticated automation needs. Also available for rollers with built-in brakes, HB-510B.

    Applicable models

    PM486FS
    PM486FE
    PM486FP
    PM570FE
    PM605FE
    PM635FS


    		   
     
     


    ITOH DENKI USA, INC - 135 Stewart Road * Hanover Industrial Estates * Hanover Township, PA 18706-1462 - 1-888-310-8811