Driver Card No. CB-002N

Models Applicable

PM486FS, PM486FE

Specification Document

CB-002 Specification Document PDF

Technical Document

CB-002 Technical Document PDF

CAD Drawing Download (.DWG)

CB-002N .DWG File

Features:

• Provides Thermal Protection for board and motor
• Built-in current limiter
• Error Output signal for self diagnosis
• Dynamic brake control
• Variable speed (25% - 100%) by onboard or remote potentiometer

Wiring Specifications for CB-002N:

Input Voltage	• 14-26VDC
Nominal Operating Voltage	• 24VDC: Battery or fullwave rectified and smoothed current <10% Ripple
Overload Protection	• Built-in Current Limiter: 2.3 - 3.2A depending on the nominal speed (current) of the unit • Thermal Overload Protector: Reacts at critical temperature either at 70° C (158° F) on the PCB, or at 105° C (221° F) in the motor, and Will reduce the motor output torque to prevent motor burnout. The motor torque will recover after cool off. • 5A fuse to power supply, power supply protection • Diode: protects the PCB from incorrect wiring • Resistance to surge • Peak current protection (6A)
Speed Variation	• 25 - 100% of the peripheral velocity by adjusting the built-in potentiometer (VR), or by external potentiometer (50kW) for remote speed control • PWM (Pulse Width Modulation) system
Control Terminals	• Power: 24VDC is supplied between #1 (+24VDC) and #2 (0V) • Start/Stop: Place ON/OFF switch between #2 and #3 • CW/CCW: CW - closed between #2 and #4 CCW - open between #2 and #4 • Remote speed control: Potentiometer (50k ohms) between #5 and #6 • Error (overload) signal output: #7 • Input signal: Pull-up at 12V (4.7kW) (#3 and #4)
Dip Switches	•SW1: Internal/external speed control •SW2: CW/CCW control
Error Indication	• LED (Green - Powered; Red - Overload)
Applicable Environment	• Temperature: 0 - 40° C (32 - 104° F) • Thermal Overload Protection may react depending on the operating conditions. • Humidity: <90% Relative Humidity (no condensation) • Atmosphere: No corrosive gasses • Vibration: 0.5G